Gate and barrier maintenance
Automated barrier maintenance for commercial sites across the UK: barrier servicing, planned maintenance and 24/7 call-out for rising arm and car park barriers. Whoever installed them.
At a glance
Gate Safe aware installer. SSAIB certified.
Why it matters
An automated barrier works every time a vehicle comes in or goes out. Without regular servicing, forces drift, safety devices fail quietly and the first warning is a barrier stuck at the entrance, or worse, an injury.
Planned maintenance keeps the system safe to use, keeps your site accessible and gives you service records that show your insurer, your health and safety advisor and the HSE it is being kept safe.
What a visit covers
Our engineers work through the whole system, not just the motor, and leave you with a written report of what was tested, what was found and what was done.
Safety devices, operators and drives, the gate leaf and structure, control and access equipment, emergency and fire release, then signage and a written service report, on any gate, barrier or blocker, whoever installed it.
The full visit checklistWhat we maintain
We take over systems from other installers and work across the leading operator manufacturers, so one contract can cover every entrance on your estate.
Automatic arm barriers on controlled entrances and yards.
Entry and exit barriers on car parks.
Control boards, safety devices, intercoms, keypads, fob readers and ANPR.
Taking over and call-out
Whoever fitted your barriers, we can take them on, and one freephone number covers faults at any hour.
The first visit is a full survey and safety test of the existing installation. If anything falls short of current standards we tell you plainly, quote for putting it right, and take the system onto a maintenance contract from there.
Call 0800 043 6728 at any hour. Out-of-hours attendance is available for gate and barrier faults.
0800 043 6728Serviced in line with BS EN 12453, HSE guidance on powered gates and Gate Safe guidance. The standards we work to
Gates and barriers
We design, install and commission new systems, and strip out and replace old ones.
Get in touch
Tell us what you have on site and we will survey it, test it and quote for the maintenance that fits.
Questions
We design, install and commission them, and strip out old ones.
Automated Barrier InstallationIt depends on how hard the barrier works. A busy car park barrier needs more frequent visits than one that lifts a few times a day. We set the visit schedule from your risk assessment, cycle count and the manufacturer’s guidance, and write it into the contract.
Yes. The first visit is a full survey and safety test of the existing installation. If anything falls short of current standards we tell you plainly, quote for putting it right, and take the system onto a maintenance contract from there.
Call 0800 043 6728 at any hour. Out-of-hours attendance is available for gate and barrier faults.
Yes. We take over systems from other installers and work across the leading operator manufacturers, so one contract can cover every entrance on your estate, whether that is a gate, a barrier or a blocker.
Yes, on commercial premises. HSE guidance says owners and occupiers of commercial premises have duties under the Workplace (Health, Safety and Welfare) Regulations 1992, including keeping it maintained, and anyone who works on it must be competent and leave it safe. There is no fixed interval in law, and service records help show it is being kept safe.
